Material Managing Electrical power UNIT

Materials Handling Energy UNIT 2
General Description
This power unit capabilities electrical power up gravity down circuit. Activate the begin solenoid to begin the motor to lift the machine. The lowing movement is activated through the solenoid valve with all the decreasing pace managed from the stress compensated movement control valve. Items of this series might be broadly utilized in the marketplace of logistic units such as fork lift, mini lift table, and so on.
Unique Notes
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic components concerned in advance of mounting the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which need to also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
4. Oil modifying is needed right after the original one hundred operation hrs,afterwards the moment every single 3000 hrs.
five. The electrical power unit need to be mounted horizontally.

Material Handling Power UNIT 1
Common Description
This energy unit is intended for that fork lift business, consisting of extremely effective gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down movement are controlled by the lever on the guide release valve, which can be equipped with an electrical switch to activate the motor. The lowing speed is managed by the strain compensated movement management valve.
Particular Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all the hydraulic parts concerned prior to set up of the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities, N46 hydraulic oil is recommended .
four. Oil altering is required after the initial a hundred operation hrs, afterwards once each and every 3000 hrs.
5. The electrical power unit shown is intended to be mounted horizontally.