Coupling Grease

Why Coupling Grease?
Sufficient lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is specifically built for gear coupling applications to boost coupling existence whilst drastically minimizing servicing time. Its large viscosity base oil and tackifier combine to keep the grease in place and prevent separation and it’s in finish compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in color and produced with a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces typically found in couplings. Bearing or general purpose greases are inclined to separate and lose effectiveness on account of large centrifugal forces around the various components at higher rotational speeds. These high centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication qualities, accumulate within the gear tooth mesh place leading to premature coupling failure. Gear Coupling Grease is created to hugely resistant to centrifugal separation of your oil and thickener, which permits the lubricant to get employed for any fairly lengthy period of time.
Among the secrets for the achievement of Gear Coupling Grease could be the variable consistency throughout the functioning cycle with the application. The consistency of our gear coupling grease alterations together with the operating circumstances. Functioning with the lubricant underneath actual service problems brings about the grease to turn into semi-fluid, functionally solash lubricating the put on surfaces of the coupling. As the grease cools, it returns to your authentic consistency, thereby stopping leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and 5 lb. cans.
Features
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust safety
Higher load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in location beneath higher speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated which has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.